Input the ”
Day
and
HOUr
” (2 digits for each), when renting is to end and
press
#
. The display will show ”
dOnE
”. The renting function is successfully set.
Press
*
and then press ”
5
”. The display will show ”
dOnE
”.
The renting function has been successfully cancelle
d.
Press
**
. The display
will show ”
PrOG
”.
Press
**
. The display
will show ”
PrOG
”.
Connect the CEU to the safe via
the USB cable supplied and turn
on the CEU by pressing the side
mounted switch to the ”I” position.
The unit will beep and the display
will show ”
GOOd
”.
It is possible, via the CEU, to set a finite period during which the safe can be used by the renter.
Once this period has elapsed, the user code programmed into the safe will cease to function.
The Master Code and the CEU paired to the safe will continue to function.
6
1
2
3
6
4
5
To set a renter’s time period
1
2
3
4
To cancel the renter function
6. SETTING THE RENTER FUNCTION
Input the factory
reset code ”
8090
”.
Press
*
and
then press ”
4
”.
Input the ”
YEAr
and
MOntH
” (2 digits for each),
when renting is to end and press
#
.
Connect the CEU to the safe via
the USB cable supplied and turn
on the CEU by pressing the side
mounted switch to the ”I” position.
The unit will beep and the display
will show ”
GOOd
”.
Input the factory
reset code ”
8090
”.
