EN
EN
Workflow:
Signal transmitting
Trigger contact/detector or
activate remote control
Max. distance
(in open area) ≤ 80m
Max. distance
(in open area) ≤ 200m
Repeater receives
signals
Control panel receives
signals
Signal transmitting
Extend Transmission Distance between Control Panel and Siren
First, press the 'Learning Button' upon the repeater, you will hear
a short beep. After that, 'Arm' the control panel on the App if it
is successfully paired, a two-second length 'beep' will sound with
blue light on, and light will alternately shining between blue and
green. Transmission distance between control panel and siren is
therefore extended.
If the repeater does not receive any signal within 1 minute, the
pairing process will be canceled, it would sound beep twice
meanwhile.
Workflow:
Signal transmitting
Control panel arm/
disarm/alarm
Max. distance
(in open area) ≤80m
Max. distance
(in open area) ≤ 200m
Repeater receives
signals
Siren receives
signals
Signal transmitting
Deleting Accessories
To remove all paired accessories, you only need to press and hold
'Learning Button' upon the repeater for five seconds; indicator
light would turn blue, wait two seconds until the light turns green
with three times beeps, then you would successfully remove all
accessories.
Specifications
Power Supply:
AC 110V-240V, 50/60Hz
Wireless Transmitting Range:
< 200m
Wireless Receiving Range:
< 80m
Radio Frequency:
433 MHz (±75KHz)
Static Current:
< 15.5mA
Transmitting Current:
< 1.1A
Maximum Accessories Supportable:
40 PCS
Back-up Battery:
3.7V 600mAh Lithium Battery, 2.22Wh
Housing Material:
ABS plastic
ERP(dBm) Max.:
-14.81
Operating Condition:
Temperature: 0°C ~ +55°C
Relative Humidity: < 80% (non-condensing)
Dimension (L x W x H):
140 x 86 x 87mm
