CHUANGO
®
Ceiling-Mounted PIR
Motion Detector
PIR- 700
Operation Manual
Introduction
0
The detector works based on detecting human body's infrared
spectrum. When human
moves
within the scope, the detector
receives the signal and inputs it into microprocessor after
magnification. Microprocessor continues to sample infrared signal
and send wireless signal to wireless control panel after
calculating. Thus to form a security system. The product can be
applied in banks, warehouses and homes etc.
Features
Accurate Detection
360' detection, no dead angle
Automatic temperature compensation and anti-air turbulence
technology
False Alarm Prevention
Digital dual-core fuzzy logic infrared control processing
technology
Effectively identify interference signals from body movement
signals through intelligent analysis
Space-saving
Ceiling-mounted, not much space occupation
Integrated to home decoration, suitable for luxury premises
Energy-saving
Featured energy-saving mode enables 1 year standby
Appearance
1. Test Button
2. Detection Lens
3. LED Indicator
4. Mounting Plate
(Q)
(Q)
0
PCB Layout
Infrared Sensor
Zone Setting
AA LR61.5V
AA LR61.5V
LED ON/OFF
Infrared sensor:
Detecting human body's infrared spectrum.
Don't touch the surface by hand and keep it clean.
LED Indication
The LED indicator can be turned on or off by setting jumpers.
See "PCB Layout" above.
Flash continuously:
Under self-testing state
Flash once:
Intruder is detected
Flash twice:
Self-testing is finished, enters working mode
Flash once every 3 seconds:
Undervoltage indication, please
change the batteries immediately.
Detection Range
Side View
3.6m
6m
Top View
360"