Chrysler PACIFICA 2019, Quick Reference Manual

Page: 5 / 24

NOTE:
The LaneSense system can be customized through
the Uconnect System touchscreen. Under “Safety and
Driving Assistance” there are two menu items:
• Warning: Early, Med, Late
• Strength: Low, Med, High
When operating conditions have been met, the
LaneSense system will monitor if the driver’s hands
are on the steering wheel and provide an audible
and visual warning to the driver when the driver’s
hands are not detected on the steering wheel. The
system will cancel if the driver does not return their
hands to the wheel.
For further information, telltale icons, and applicable
warnings and cautions, please refer to the Owner’s
Manual
at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
ParkSense Rear Or
ParkSense Front And Rear
Park Assist — If Equipped
The ParkSense Park Assist system provides visual and
audible indications of the distance between the rear
fascia and a detected obstacle when backing up, e.g.
during a parking maneuver. If equipped with front
sensors, visual and audible indications will also be pro-
vided for obstacles in front of the vehicle (the front
sensors can also give indications when moving in re-
verse). The vehicle brakes may be automatically ap-
plied and released when performing a reverse parking
maneuver if the system detects a possible collision
with an obstacle.
• The four ParkSense sensors, located in the rear
fascia/bumper, monitor the area behind the vehicle
that is within the sensor’s field of view. These sen-
sors can detect obstacles from approximately
12 inches (30 cm) up to 79 inches (200 cm) from
the rear bumper while the vehicle is in REVERSE.
• The six ParkSense sensors (if equipped), located in
the front fascia/bumper, monitor the area in front
of the vehicle that is within the sensors’ field of view.
These sensors can detect obstacles from approxi-
mately 12 inches (30 cm) up to 47 inches (120 cm)
from the front fascia/bumper in the horizontal di-
rection, depending on the location, type, and ori-
entation of the obstacle.
• When an obstacle is detected, a warning will display
in the instrument cluster and a chime will sound
(when “Sound and Display” is selected from the
Customer Programmable Features section of the
Uconnect System screen). As the vehicle moves
closer to the object, the chime rate will change from
single 1/2 second tone, to slow, to fast, to
continuous.
• If the system detects a potential impact with an
object, the vehicle brakes may be applied.
P A R K S E N S E