Chrysler JOURNEY Owner'S Manual Download Page 106

Page: 106 / 408

JOBNAME: cims CHRY OM French

PAGE: 106 SESS: 2 OUTPUT: Mon Nov 22 10:53:21 2010 SUM: 226BCE2C

/chry_pdm/chrysler/owners/jcd/og

•

Touch the + next to the Favorite you
would like to remove.

•

The Options pop up will display, touch
Remove from Favs.

Emergency And Towing Assistance

The Emergency and Towing Favorite num-
bers can only be altered. These cannot be
deleted

and

the

names

cannot

changed.

To change the Emergency or Towing num-
ber follow these steps.

•

Touch the phonebook soft-key from the
Phone main screen.

•

Touch the Favorites soft-key. Next scroll
to the bottom of the list to locate the
Emergency and Towing Favorites.

•

Touch the + Options soft-key.

•

Touch the + next to appropriate Favorite
that is to be altered.

•

The Options pop will appear and you
can choose between Editing the num-
ber or resetting the number to default.

Phone Call Features

The following features can be accessed
through the Uconnect™ Phone if the fea-
ture(s) are available and supported by
Bluetooth

on your mobile service plan.

For example, if your mobile service plan
provides three-way calling, this feature
can be accessed through the Uconnect™

art=ctp-35907.tif

NO TRANS

art=ctp-35910.tif

NO TRANS

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

106

Summary of Contents for JOURNEY

























































































































































































































































































































































































































Search results

Summary of Contents for JOURNEY

Reviews:

Chrysler JOURNEY, Owner'S Manual, Page: 106 / 408

Search results

Summary of Contents for JOURNEY

Reviews: