Chrysler ASPEN, Owner'S Manual

Page: 244 / 481

NOTE:
•
If the radio has a USB port, connecting an iPod
t
to this
port does not play the media. For playing an iPod
t
,
use the separate 16–pin connector port (in the glove
compartment on some vehicles).
•
Connecting an iPod
t
to the AUX port located in the
radio faceplate, plays media, but does not use the UCI
feature to control the connected device.
Connecting The iPod
T
Use the optional connection cable to connect an iPod
t
to
the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod
t
is connected and synchronized to the vehicle’s UCI
system (iPod
t
may take a few seconds to connect), the
iPod
t
starts charging and is ready for use by pressing
radio switches, as described below.
NOTE:
•
You may have to remove the connector pin protection
cap from the 16–pin connector port, prior to connect-
ing the cable.
•
If the iPod
t
battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod
t
connected
to the UCI system may charge it to the required level.
Using This Feature
By using the optional connection cable to connect an
iPod
t
to the vehicle’s UCI 16–pin connector port:
•
The iPod
t
audio can be played on the vehicle’s sound
system, providing metadata (Artist, track title, album,
etc.) information on the radio display.
•
The iPod
t
can be controlled using the radio buttons to
Play, Browse, and List the iPod
t
contents.
•
The iPod
t
battery charges when plugged into the UCI
connector.
242 UNDERSTANDING YOUR INSTRUMENT PANEL