Chrysler 300 SRT8 2013 Owner'S Manual Download Page 224

Page: 224 / 563

NOTE:

If ACC is resumed or set with the ESC/TCS off,

ESC will automatically be re-engaged.

To Turn Off

The system will turn off and erase the set speed in
memory if:

•

You push and release the ON/OFF button.

•

You turn OFF the ignition.

To Resume Speed

Press the RES

button and release. Then remove your

foot from the accelerator pedal. The EVIC will display the
last set speed.

NOTE:

You can resume ACC from a minimum of

20 mph (30 km/h).

Adaptive Cruise Control (ACC) Cancelled

222

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 SRT8 2013

Reviews:

Related manuals for 300 SRT8 2013

Brands by name

Popular brands

Chrysler 300 SRT8 2013, Owner'S Manual

Search results

Summary of Contents for 300 SRT8 2013

Reviews:

Related manuals for 300 SRT8 2013

Brands by name

Popular brands