Chrysler 300 SRT8 2013 Owner'S Manual Download Page 123

Page: 123 / 563

Uconnect

姞

Phone (8.4/8.4N)

Uconnect

姞

8.4/8.4 Nav

Uconnect

威

Phone is a voice-activated, hands-free, in-

vehicle communications system. Uconnect

威

Phone al-

lows you to dial a phone number with your mobile
phone.

Uconnect

威

Phone supports the following features:

Voice Activated Features:

•

Hands Free dialing via Voice (“Call John Smith’s
Mobile” or, “Dial 248 555-1212”).

•

Hands Free text to speech listening of your incoming
SMS messages.

•

Hands Free text messaging (“Send a message to John
Smith’s Mobile”).

•

Redialing last dialed numbers (“Redial”).

•

Calling Back the last incoming call number (“Call
Back”).

•

View Call logs on screen (“Show incoming calls”,
“Show Outgoing calls”, “Show missed Calls”, “Show
Recent Calls”).

•

Searching Contacts phone number (“Search for John
Smith Mobile”).

Screen Activated Features

•

Dialing via Keypad using touch-screen.

•

Viewing and Calling contacts from Phonebooks dis-
played on the touch-screen.

•

Setting Favorite Contact Phone numbers so the are
easily accessible on the Main Phone screen.

•

Viewing and Calling contacts from Recent Call logs.

•

Reviewing your recent Incoming SMS.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

121

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 SRT8 2013

Reviews:

Related manuals for 300 SRT8 2013

Brands by name

Popular brands

Chrysler 300 SRT8 2013, Owner'S Manual

Search results

Summary of Contents for 300 SRT8 2013

Reviews:

Related manuals for 300 SRT8 2013

Brands by name

Popular brands