Chrysler 300 2021 Owner'S Manual Download Page 287

Page: 287 / 312

SERVICING AND MAINTENANCE

285

Seat Belt Maintenance

Do not bleach, dye, or clean the belts with

chemical solvents or abrasive cleaners. This will

weaken the fabric.
If the belts need cleaning, use Mopar Total

Clean, a mild soap solution, or lukewarm water.

Do not remove the belts from the vehicle to

wash them. Dry with a soft cloth.
Sun damage can also weaken the fabric.

Replace the belts if they appear frayed or worn

or if the buckles do not work properly.

LASTIC

OATED

ARTS

Use Mopar Total Clean to clean vinyl upholstery.

WARNING!

A frayed or torn belt could rip apart in a

collision and leave you with no protection.

Inspect the belt system periodically, checking

for cuts, frays, or loose parts. Damaged parts

must be replaced immediately. Do not

disassemble or modify the system. Seat belt

assemblies must be replaced after a collision

if they have been damaged (i.e., bent

retractor, torn webbing, etc.).

CAUTION!



Direct contact of air fresheners, insect

repellents, suntan lotions, or hand sani

tizers to the plastic, painted, or decorated

surfaces of the interior may cause perma

nent damage. Wipe away immediately.



Damage caused by these type of products

may not be covered by your New Vehicle

Limited Warranty.

21_LX_OM_EN_USC_t.book Page 285

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands