Chrysler 300 2021 Owner'S Manual Download Page 168

Page: 168 / 312

166

SAFETY

AUXILIARY DRIVING SYSTEMS

LIND

POT

ONITORING

(BSM) —

QUIPPED

The BSM system uses two radar sensors,

located inside the rear fascia/bumper, to detect

highway licensable vehicles (automobiles,

trucks, motorcycles, etc.) that enter the blind

spot zones from the rear/front/side of the

vehicle.

Rear Detection Zones

When the vehicle is started, the BSM Warning

Light will momentarily illuminate in both outside

rearview mirrors to let the driver know that the

system is operational. The BSM system sensors

operate when the vehicle is in any forward gear

or REVERSE.

BSM Warning Light

The BSM detection zone covers approximately

one lane width on both sides of the vehicle 12 ft

(3.8 m). The zone length starts at the outside

rearview mirror and extends approximately

10 ft (3 m) beyond the rear fascia/bumper of

the vehicle. The BSM system monitors the

detection zones on both sides of the vehicle

when the vehicle speed reaches approximately

6 mph (10 km/h) or higher and will alert the

driver of vehicles in these areas.

NOTE:



The BSM system DOES NOT alert the driver

about rapidly approaching vehicles that are

outside the detection zones.



The BSM system detection zone DOES NOT

change if your vehicle is towing a trailer.

Therefore, visually verify the adjacent lane is

clear for both your vehicle and trailer before

making a lane change. If the trailer or other

object (i.e., bicycle, sports equipment)

extends beyond the side of your vehicle, this

may result in the BSM warning light randomly

alerting on the trailer or even remaining illu

minated the entire time the vehicle is in a

forward gear

page 144.



The Blind Spot Monitoring (BSM) system may

experience drop outs (blinking on and off) of

the side mirror Warning Indicator lamps

when a motorcycle or any small object

remains at the side of the vehicle for

extended periods of time (more than a couple

of seconds).

The BSM system can become blocked if snow,

ice, mud, or other road contaminations

accumulate on the rear fascia/bumper where the

radar sensors are located. The system may also

detect blockage if the vehicle is operated in areas

with extremely low radar returns such as a desert

or parallel to a large elevation drop. If blockage is

detected, a “Blind Spot Temporarily Unavailable,

Wipe Rear Corners” message will display in the

21_LX_OM_EN_USC_t.book Page 166

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands