Chrysler 300 2021 Owner'S Manual Download Page 133

Page: 133 / 312

STARTING AND OPERATING

131

NOTE:

If snow, ice, mud, or any foreign substance

builds up on the camera lens, clean the lens,

rinse with water, and dry with a soft cloth. Do

not cover the lens.

REFUELING THE VEHICLE

1. Push the fuel filler door release switch

(located in the driver's door map pocket).

Fuel Filler Door Release Switch

2. Open the fuel filler door.

Fuel Filler Location

NOTE:

In certain cold conditions, ice may prevent the

fuel door from opening. If this occurs, lightly

push on the fuel door to break the ice buildup

and re-release the fuel door using the inside

release button. Do not pry on the door.

3. There is no fuel filler cap. Two flapper doors

inside the pipe seal the system.

4. Insert the fuel nozzle fully into the filler pipe

– the nozzle opens and holds the flapper

doors while refueling.

5. Fill the vehicle with fuel – when the fuel

nozzle “clicks” or shuts off the fuel tank is

full.

6. Maintain nozzle in filler for five seconds to

allow nozzle to drain.

7. Remove the fuel nozzle and close the fuel

door.

NOTE:

A funnel is provided (located in the trunk in the

spare tire area) to open the flapper doors to

allow for emergency refueling with a gas can.

CAUTION!



To avoid vehicle damage, ParkView should

only be used as a parking aid. The ParkView

camera is unable to view every obstacle or

object in your drive path.



To avoid vehicle damage, the vehicle must

be driven slowly when using ParkView to be

able to stop in time when an obstacle is

seen. It is recommended that the driver

look frequently over his/her shoulder when

using ParkView.



It is recommended that the driver look

frequently over his/her shoulder when

backing up, especially in sunny weather

conditions, since there may be a glare from

the sun at certain angles that can make the

image on the touchscreen difficult to see.

21_LX_OM_EN_USC_t.book Page 131

Summary of Contents for 300 2021

























































































































































































































































































































Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands

Chrysler 300 2021, Owner'S Manual

Search results

Summary of Contents for 300 2021

Reviews:

Related manuals for 300 2021

Brands by name

Popular brands