manualshive.com logo in svg

Chrysler 300 2012, Owner'S Manual

The Chrysler 300 2012 is a luxurious and powerful sedan, boasting impressive specifications such as a robust engine, refined interior, and advanced safety features. If you're in need of its user manual, head over to manualshive.com to download it for free. Discover all the necessary details about this remarkable vehicle before hitting the road.

Share
Download
background image

To Unlatch The Trunk

Press the TRUNK button on the RKE transmitter two
times within five seconds to unlatch the trunk.

If the vehicle is equipped with Passive Entry, refer to
“Keyless Enter-N-Go” under “Things To Know Before
Starting Your Vehicle” for further information.

Using The Panic Alarm

To turn the Panic Alarm feature on or off, press and hold
the PANIC button on the RKE transmitter for at least one
second and release. When the Panic Alarm is on, the
headlights will turn on, the park lights will flash, the
horn will pulse on and off, and the interior lights will
turn on.

The Panic Alarm will stay on for three minutes unless
you turn it off by either pressing the PANIC button a
second time or drive the vehicle at a speed of 15 mph
(24 km/h) or greater.

NOTE:

•

The interior lights will turn off if you cycle the ignition
switch to the ACC or ON/RUN position while the
Panic Alarm is activated. However, the exterior lights
and horn will remain on.

•

You may need to be less than 35 ft (11 m) from the
vehicle when using the RKE transmitter to turn off the
Panic Alarm due to the radio frequency noises emitted
by the system.

Programming Additional Transmitters

Programming Key Fobs or RKE transmitters may be
performed at an authorized dealer.

24

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 300 2012

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 2012

Jeep Wrangler 2011 Owner'S Manual preview
Wrangler 2011
Brand: Jeep Pages: 603
Jeep Patriot 2011 User Manual preview
Patriot 2011
Brand: Jeep Pages: 80
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Ford 2004 Freestar Workshop Manual preview
2004 Freestar
Brand: Ford Pages: 8
Intec CVD500LCD Installation And Operation Manual preview
CVD500LCD
Brand: Intec Pages: 16
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
SMART EQ forfour 2018 Owner'S Manual preview
EQ forfour 2018
Brand: SMART Pages: 224
SuperATV IN-WS-K-TRX Installation Instructions preview
IN-WS-K-TRX
Brand: SuperATV Pages: 2
AUTOTECH 10.109.405K Installation Instructions preview
10.109.405K
Brand: AUTOTECH Pages: 2
Ace K9 HA-2520 Installation Manual preview
HA-2520
Brand: Ace K9 Pages: 14
Buick 2010 Lucerne Owner'S Manual preview
2010 Lucerne
Brand: Buick Pages: 475
Prorack K442 Fitting Instructions Manual preview
K442
Brand: Prorack Pages: 15
ADAPT SOLUTIONS ASENTO EV-EXP18R Installation Manual preview
ASENTO EV-EXP18R
Brand: ADAPT SOLUTIONS Pages: 25
Axxess OESWC-7552-STK Installation Instructions Manual preview
OESWC-7552-STK
Brand: Axxess Pages: 8
E&P HYDRAULICS Electronic Levelling System User Manual preview
Electronic Levelling System
Brand: E&P HYDRAULICS Pages: 6

Brands by name

Popular brands

Load more brands