Chrysler 300 2012 Owner'S Manual Download Page 208

Page: 208 / 576

To Cancel

The system will disable ACC without erasing the
memory if:

•

You softly tap the brake pedal.

•

You depress the brake pedal.

•

You press the CANCEL switch.

•

An Anti-Lock Brake System (ABS) event occurs.

•

If the transmission is shifted into NEUTRAL.

•

The Electronic Stability Control/Traction Control Sys-
tem (ESC/TCS) activates.

NOTE:

If ACC is resumed or set with the ESC/TCS off,

ESC will automatically be re-engaged.

To Turn Off

The system will turn off and erase the set speed in
memory if:

•

You push and release the ON/OFF button.

•

You turn OFF the ignition.

Adaptive Cruise Control (ACC) Cancelled

206

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 300 2012

































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 2012

Reviews:

Related manuals for 300 2012

Brands by name

Popular brands

Chrysler 300 2012, Owner'S Manual

Search results

Summary of Contents for 300 2012

Reviews:

Related manuals for 300 2012

Brands by name

Popular brands