
Vehicles Equipped with Remote Start
On models that are equipped with remote start,
the driver’s heated seat and heated steering
wheel can be programmed to come on during a
remote start. Refer to “Remote Starting System
— If Equipped” in “Things To Know Before
Starting Your Vehicle” for further information.
Front Heated Seats With Uconnect® 5.0 —
If Equipped
There are two heated seat switches that allow
the driver and passenger to operate the seats
independently. The controls for each heater are
located in the Uconnect® system screen.
You can choose from HIGH, LOW or OFF heat
settings.
Press the “Climate” hard-key located on the
right side of the Uconnect® display.
Press the “Driver” or “Passenger” seat soft-key
once to select HI-level heating. Press the soft-
key a second time to select LO-level heating.
Press the soft-key a third time to shut the
heating elements OFF.
NOTE:
Once a heat setting is selected,
heat will be felt within two to
five minutes.
When the HI-level setting is selected, the heater
will provide a boosted heat level during the first
four minutes of operation. Then, the heat output
will drop to the normal HI-level. If the HI-level
setting is selected, the system will automatically
switch to LO-level after a maximum of 60 min-
utes of continuous operation. At that time, the
display will change from HI to LO, indicating the
change. The LO-level setting will turn OFF
automatically after a maximum of 45 minutes.
Front Heated Seats With Uconnect®
8.4A/8.4AN — If Equipped
There are two heated seat soft-keys that allow
the driver and passenger to operate the seats
independently. The controls for each heater are
located in the Uconnect® system screen.
Press the “Controls” soft-key located on the
bottom of the Uconnect® display.
Press the “Driver” or “Passenger” seat soft-key
once to select HI-level heating. Press the soft-
key a second time to select LO-level heating.
Press the soft-key a third time to shut the
heating elements OFF.
NOTE:
Once a heat setting is selected,
heat will be felt within two to
five minutes.
When the HI-level setting is selected, the heater
will provide a boosted heat level during the first
four minutes of operation. Then, the heat output
will drop to the normal HI-level. If the HI-level
setting is selected, the system will automatically
switch to LO-level after a maximum of 60 min-
utes of continuous operation. At that time, the
display will change from HI to LO, indicating the
change. The LO-level setting will turn OFF
automatically after a maximum of 45 minutes.
78
PAGE POSITION: 80
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
1382968-en-2014_GRAND_CHEROKEE14WK742-126-ENG-AA/DIV_Owners_Manual_v1