Chrysler 2009 PT Cruiser Owner'S Manual Download Page 103

Page: 103 / 410

Delete uconnect

威

phone Paired Cellular Phones

•

Press the PHONE button to begin.

•

After the

⬙

Ready

⬙

prompt and the following beep, say

⬙

Setup Phone Pairing.

⬙

•

At the next prompt, say

⬙

Delete

⬙

and follow the

prompts.

•

You can also press the VOICE RECOGNITION button
at any time while the list is being played, and then
choose the phone you wish to delete.

Things You Should Know About Your uconnect

姞

phone

uconnect

威

phone Tutorial

To hear a brief tutorial of the system features, press the
PHONE button and say “uconnect

威

Tutorial.”

Voice Training

For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the uconnect

威

phone Voice Training feature may be used. To enter this
training mode, follow one of the two following proce-
dures:

From outside the uconnect

威

phone mode (e.g., from radio

mode):

•

Press and hold the VOICE RECOGNITION button for
five seconds until the session begins, or,

•

Press the VOICE RECOGNITION button and say the

⬙

Setup, Voice Training

⬙

command.

Repeat the words and phrases when prompted by the
uconnect

威

phone. For best results, the Voice Training

session should be completed when the vehicle is parked
with the engine running, all windows closed, and the
blower fan switched off.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

101

Summary of Contents for 2009 PT Cruiser



























































































































































































































































































































































































































Search results

Summary of Contents for 2009 PT Cruiser

Reviews:

Brands by name

Popular brands

Chrysler 2009 PT Cruiser, Owner'S Manual

Search results

Summary of Contents for 2009 PT Cruiser

Reviews:

Brands by name

Popular brands