Chrysler 2008 Pacifica Owner'S Manual Download Page 261

Page: 261 / 457

This feature may be enabled using the following proce-
dure:

•

Press and hold the Heated Rear Window and Auto HI
buttons for 5 seconds.

•

The “DELAY” symbol will flash to indicate that the
feature as been enabled.

Power Button
This button turns the entire system ON/OFF. When the
system is turned on it will return to the previous settings.

Dual/Single Zone Operation
When

DUAL

is displayed in the ATC control unit, the

driver and passenger air outlet temperatures can be
individually adjusted from the two independent

TEMP

buttons. When a front seat passenger is not present,
pressing the

DUAL

button will match the passenger’s

temperature setting to the driver’s temperature setting.
This will help equalize air outlet temperatures across the

left and right side of the instrument panel. The outside
temperature will replace the passenger’s temperature
setting in the display. Pressing the

DUAL

button a

second time or adjusting the passenger’s

TEMP

button

will return the system to dual independent temperature
operation.

Manual Operation
This system offers a full complement of manual override
features. The indicator light in both the

AUTO HI

AUTO LO

buttons will turn off when the system is

being used in the manual mode. The fan speed, airflow
distribution, and outside air/recirculated air can be
manually adjusted.

NOTE:

Each of these features operate independently

from each other. If any one feature is controlled manually,
the remaining features will continue to operate automati-
cally.

UNDERSTANDING YOUR INSTRUMENT PANEL

261

Summary of Contents for 2008 Pacifica










































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Pacifica

Reviews:

Brands by name

Popular brands

Chrysler 2008 Pacifica, Owner'S Manual

Search results

Summary of Contents for 2008 Pacifica

Reviews:

Brands by name

Popular brands