Chrysler 2007 PT Cruiser Convertible Instruction Manual Download Page 43 | Manualshive

Page: 43 / 458

Chrysler 2007 PT Cruiser Convertible Instruction Manual Download Page 43

WARNING!

Never leave children in a vehicle, with the keys in
the ignition switch. Occupants, particularly unat-
tended children, can become entrapped by the win-
dows while operating the power window switches.
Such entrapment may result in serious injury or
death.

Auto Down Feature

The driver’s and passenger’s front window switches
have an auto down feature. Press the window switch past
the detent, release, and the window will go down auto-
matically. Press the switch a second time in either direc-
tion to stop the window.

To open the window part way, press the window switch
part way and release it when you want the window to
stop.

Rear Window Switches

There are also rear passenger window switches (sedan
only) located at the rear of the center console.

Power Rear WIndow Switches Sedans

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

43

2

«
...
41
42
43
44
45
...
»

Summary of Contents for 2007 PT Cruiser Convertible











































































































































































































































































































































































































































































Reviews:

No comments