Home
/
Chrysler
/
2007 Aspen
/
Owner'S Manual

Chrysler 2007 Aspen, Owner'S Manual, Page: 143 / 472

Share

Page: 143 / 472

Chrysler 2007 Aspen Owner'S Manual Download Page 143

To Activate

NOTE:

Activating any two speed control switch func-

tions simultaneously (i.e. SET and CANCEL) will cause
the speed control system to shut off and will erase the
memory.

Push the ON/OFF button to the ON position. In the
instrument cluster, the word “CRUISE” illuminates when
the system is on.

To Set At A Desired Speed

When the vehicle has reached the desired speed, press
and release the SET button. Release the accelerator and
the vehicle will operate at the selected speed.

To Deactivate

A soft tap on the brake pedal, normal braking, or pressing
the CANCEL button will deactivate speed control with-
out erasing the memory. Pushing the ON/OFF button to
the OFF position or turning off the ignition erases the
memory.

WARNING!

Leaving the Speed Control ON when not in use is
dangerous. You could accidentally set the system to
cause it to go faster than you want. You could lose
control and have an accident. Always leave the
system OFF when you aren’t using it.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

143

3

«
...
141
142
143
144
145
...
»

Summary of Contents for 2007 Aspen

























































































































































































































































































































































































































































































Reviews:

No comments