Chrysler 2004 Town and Country, Manual, Page: 116 / 401

Share

Page: 116 / 401

Chrysler 2004 Town and Country Manual Download Page 116

ADJUSTABLE PEDALS — IF EQUIPPED

This feature allows both the brake and accelerator pedals
to move toward or away from the driver to provide
improved position with the steering wheel. The adjust-
able pedal system is designed to allow a greater range of
driver comfort for steering wheel tilt and seat position.
The switch is located on the right side of the steering
column.

Press the button forward to move the pedals forward
(toward the front of the vehicle).

Press the button rearward to move the pedals rearward
(toward the driver).

•

The pedals can be adjusted with the ignition OFF.

•

The pedals can be adjusted while driving.

116

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
114
115
116
117
118
...
»

Summary of Contents for 2004 Town and Country


















































































































































































































































































































































































































Reviews:

No comments