Home
/
Chrysler
/
2004 Crossfire
/
Manual

Chrysler 2004 Crossfire, Manual, Page: 53 / 251

Share

Page: 53 / 251

Chrysler 2004 Crossfire Manual Download Page 53

Glove Compartment

To lock the glove compartment, turn the key to the right
and remove. To unlock, turn the key to the left and
remove.

Pull on the handle to open the glove compartment.

CUPHOLDER

The cupholder is located in the console. To open the
cupholder, gently press downward on the front edge of
the top panel, and then release. The cupholder will open
automatically.

When the cupholder is no longer needed, push forward
on the top edge of the door and rotate it down into the
console until it engages.

The cupholder is designed to hold beverage containers
up to 20 oz. (1 L).

CAUTION!

Only use containers that fit into the cupholder.
Overfilled containers could spill during vehicle ma-
neuvers.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

53

3

«
...
51
52
53
54
55
...
»

Summary of Contents for 2004 Crossfire




























































































































































































































































Reviews:

No comments