Chrysler 200 Sedan 2012 Owner'S Manual Download Page 34

Page: 34 / 522

Auto Unlock On Exit

The doors will unlock automatically on vehicles with
power door locks if:

1. The Automatic Unlock Doors On Exit feature is en-
abled.

2. The transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h).

3. The transmission is in NEUTRAL or PARK.

4. The driver door is opened.

5. The doors were not previously unlocked.

6. The vehicle speed is 0 mph (0 km/h).

Auto Unlock On Exit Programming

The Automatic Unlock Doors On Exit feature can be
enabled or disabled as follows:

•

For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to “Electronic Vehicle
Information

Center

(EVIC)/Personal

Settings

(Customer-Programmable Features)” in “Understand-
ing Your Instrument Panel” for further information.

•

For vehicles not equipped with the EVIC, perform the
following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between LOCK and ON/
RUN and then back to LOCK four times, ending up in the
LOCK position.

3. Press the power door unlock switch to unlock the
doors.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 200 Sedan 2012











































































































































































































































































































































































































































































































































Search results

Summary of Contents for 200 Sedan 2012

Reviews:

Brands by name

Popular brands

Chrysler 200 Sedan 2012, Owner'S Manual

Search results

Summary of Contents for 200 Sedan 2012

Reviews:

Brands by name

Popular brands