Chrysler 200 2012 Owner'S Manual Download Page 406

Page: 406 / 508

3. Turn the ignition to the ON/RUN position without
starting the engine.

4. Press and maintain firm pressure on the brake pedal.

5. Insert a screwdriver or similar tool into the hole at the
front of the cupholder and push and hold the override
lever forward.

6. Move the shift lever into the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.

8. Reinstall the cupholder liner.

TOWING A DISABLED VEHICLE

Towing Condition

Wheels OFF the Ground

Automatic Transmissions

Flat Tow

NONE

If transmission is operable:

•

Transmission in

NEUTRAL

•

25 mph (40 km/h)

max

speed

•

15 mi (24 km)

max

distance

Wheel Lift Or Dolly Tow

Rear

Front

Flatbed

ALL

BEST METHOD

404

WHAT TO DO IN EMERGENCIES

Summary of Contents for 200 2012





























































































































































































































































































































































































































































































































Search results

Summary of Contents for 200 2012

Reviews:

Chrysler 200 2012, Owner'S Manual, Page: 406 / 508

Search results

Summary of Contents for 200 2012

Reviews: