Open the protection flap of the crown.
Unscrew the crown by turning it
counter-clockwise. Wind up the watch until the second hand starts to run
by turning the crown between 30 and 40 times. Pull the crown carefully
into position
2
and set the time to 7 o‘clock. Now you can use the pusher
A
to set the day. With the pusher
B
set the month. Move the crown into posi-
tion
1
and set the date on, by turning the crown counter-clockwise. Bring
the crown back to position
2
and set the current time by turning the crown
in a clockwise direction. The display in the centre shows a 24 hour display
(1 - 24). Afterwards, push the crown in and screw in. For months with less
than 31 days, the date at the end of the month must be set manually.
Important! Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time. Please
press the button on your watch slowly and carefully to avoid dama-
ging the mechanism. When the warranty of your watch expires, we
recommend you to send it in for a revision to ensure its longevity. A
revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.
EN
Summary of Contents for Andre Belfort AB-7910
