chromasens allPIXA, Manual

Page: 124 / 199

CD40047_R04_allPIXA_User-Manual.docx 124
4

In the tree view, click White control .

Select the Enable continuous white control check box.

Select the tap for white control

Make sure that the Use sync mode check box is cleared:

Set the target reference values:
If the white target is placed at the borders of the image, they might be lower than in the
center.

On the toolbar, click Transfer setting to camera , or press F9 .
5

Wait for balanced image.

Check for saturation.

In CST, on the toolbar, click Refresh current camera parameters :

On the toolbar, click Burn setting permanently , or press F10 .
6

Check the function by lowering the light in the control zone, for example by a
shadow.