Chroma Space Force 650-9070 Quick Start Manual Download Page 2

Space Force

TM

 octo LumenRadio Card QSG V2.0 

QSG P/N: 650-0902

 

 

1.  Overview 

The Chroma-Q

®

 Space Force

™ octo LumneRadio Card Kit allows addition of RF connectivity to 

the Space Force™ octo light fixture. For a complete list of accessories please visit www.chroma-
q.com. 
 

2.  Kit Contents 

Items  

Part Number 

Quantity 

Radio Printed Circuit Board  

650-0325 

Round Spacer 5/16” 

900-1321 

Screw M3X20 Machine Screw 

430-1220-0 

Grommet for Antenna 

430-1220-0 

 

3.  Tools Required 

Torx T8 x 70mm Screwdriver (maximum torque: 0.62 

N-m

/ 5.5 

in

lb

#1 Phillips Screwdriver or bit (Torque 5.5 

in-lb

 

4.  Procedure 

1.

 Place Space Force

™ unit acrylic side down on a surface 

that will not scratch the lens, or damage the unit. 
 

2.

 Carefully remove the 4 Torx screws that secure the ABS 

plastic back cover. These screws have a T8 Torx head. If 
using a power driver, set torque to 5.5 

in-lb

. Set aside the 

screws. 

 

 

3.

 Carefully lift the back cover from the unit. The adjusting 

knobs will slide off with the cover. Remove the 5-pin 
overlay connector from the PCB board before completely 
removing the cover. Do not bend the pins. Set back cover 
aside.   

 

 

4.

 Remove the 4 x M3 screws from the PCB bracket 

assembly using a Philip’s #1 screwdriver. If using a power 
driver, set torque to 5.5lb-in. Set screws aside. On the 
grounding side, there is a star washer- be sure this does 
not fall into the unit. Set aside the hardware.   

 

 

5. 

Unplug the engine connectors (white and 

orange wires) from the PCB bracket 
assembly to turn the assembly over and 
expose the internal components. The order 
of these connectors is not critical when 
replacing them later.

 

  

 

Reviews: