Inspire
TM
Spreader Lens Kit QSG V3.0
QSG P/N: 632-0715
5. Procedure
i.
Remove the Bezel by taking out 2 M3 flat head screws using PH#1 screwdriver,
save them for later.
ii.
Keeping the permanent lens in place, the spreader lens has two clearance holes
diametrically opposite to match the position of the mounting holes for the Bezel
iii. Add the spreader lens
– dull side facing inwards – on top of the permanent lens
making sure that the mounting underneath can be reached. Tighten the 2 X M3
flat head screws removed from the bezel.
iv. The two provided lenses in the kit are side specific and are marked
a. Medium Lens (900-9116) for approx. 42
◦
beam angle
b. Wide Lens (900-9118) for approx. 65
◦
beam angle
Note:
During installation keep the shiny side of the lens to the outside. It has been
marked with the specified degree sticker on it.
6. Further Information
Please refer to the Chroma-Q
®
Inspire
TM
manual for more detailed information. A copy
of the manual can be found at the Chroma-Q
®
website
