Chroma 62000D Series, Operating And Programming Manual

Page: 149 / 180

Remote Operation
5-23
BIT 6 Calibration Error BIT 22
System parameter
Error
BIT 7 Reserve BIT 23 Boot Up Initial Error
BIT 8 Reserve BIT 24 FAN Start Up Error
BIT 9 Reserve BIT 25 AD Number Error
BIT 10 Fold Back CV to CC BIT 26 DD Number Error
BIT 11 Fold Back CC to CV BIT 27
CD FPGA Number
Error
BIT 12 LOCP BIT 28 Keypro In/Out
BIT 13 LOPP BIT 29 Reserve
BIT 14 UTP BIT 30 Cascade Conn Error
BIT 15 AD_PROTECT BIT 31 Slave Protect Alarm
<Arg2>: ON|OFF output status at present
<Arg3>: CV or CC status at present
Query Example: FETCh:STATus?
Return Example: 0,OFF,CV
5.6.2.6 MEASURE Subsystem
1. MEASure:VOLTage?
Description: Returns the voltage measured at the output of power supply.
Query Syntax: MEASure:VOLTage?
Return Parameter: <NRf+> [Unit=Volt]
Query Example: MEAS:VOLT?
Return Example: 8.01
2. MEASure:CURRent?
Description: Returns the current measured at the output of power supply (with
sign)..
Query Syntax: MEASure:CURRent?
Return Parameter: <NRf+> [Unit=Amp]
Query Example: MEAS: CURR?
Return Example: 3.01
3. MEASure:POWer?
Description: Returns the power measured at the output of power supply (with
sign).
Query Syntax: MEASure: POWer?
Return Parameter: <NRf+> [Unit=Watt]
Query Example: MEAS: POWer?
Return Example: 5.03
5.6.2.7 PROGRAM Subsystem
1. PROGram:MODE
Description: Sets the program output mode.
Syntax: PROGram:Mode <Arg>
Parameter: <Arg>: LIST | STEP
Example: PROGram:Mode STEP
Query Syntax: PROGram:Mode?