6
How to operate your C60 Trident Pro 300
For a superior water resistance your crown is of the screw-down
type. The crown should sit flush to the case (position
1
) in order
to maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2
for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Trident Pro 300 has a maximum power
reserve of 38 hours when fully wound. Normal wearing will allow
the rotor to start re-powering the watch over time after putting
on your wrist.
• Pull gently into position
3
. For rapid date correction, turn in a
clockwise direction.
• Pull gently into position
4
. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time and date
Summary of Contents for C60 Trident Pro 300
Page 1: ...C60 Trident Pro 300 Owner s Handbook...
Page 3: ...2 2...
Page 10: ...9 Bezel marker No decompression limit Start of dive...
