background image

7

How to operate your C60 Trident 316L

For a superior water resistance your crown is  
of the screw-in type. The crown should sit  
flush to the case (position 

1

) in order to maintain 

water resistance.

•  First unscrew the crown anti-clockwise from the 

case to position 

2

 for winding in power. Wind in  

a clockwise direction to re-power the watch. 

Your C60 Trident 316L has a maximum power 

reserve of 38 hours when fully wound. Normal 

wearing will allow the rotor to start re-powering 

the watch over time after putting it on your wrist.

•   Pull gently into position 

3

. For rapid date 

correction, turn in a clockwise direction.

•   Pull gently into position 

4

. This position is used  

for handsetting and stopping of the second hand. 

For precise time setting it is recommended to 

pass beyond the desired minute and to set the 

hand backwards.

PLEASE NOTE: Date correction should not be 
carried out between 20.00 hr and 02.00 hr 
as the watch gearing will already be aligning 
itself to change the date. The crown should 
always be pushed in after adjustment,  
and it is best to do so from position 3 to  
avoid advancing beyond the desired date.

You must always ensure the crown is fully 
tightened before any use in water.

Summary of Contents for C60 Trident 316L















Reviews: