8
How to operate your C60 Lympstone
For a superior water resistance your crown is of the screw-in type.
The crown should sit flush to the case (position
1
) in order to
maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2
for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Lympstone has a maximum power reserve of
38 hours when fully wound. Normal wearing will allow the rotor to
start re-powering the watch over time after putting on your wrist.
After a period of non-use we recommend that you manually wind
the watch at least 20 times to ensure there is sufficient power in
the watch before the rotor maintains the power.
• Pull gently into position
3
. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time
Summary of Contents for C60 Lympstone
