11
10
Pull out the crown to position (the watch
stops).
Turn the crown clockwise until the correct date
ie. 4th appears (after passing through midnight).
Continue to turn the crown until the correct
time 20.30 hr appears.
Push the crown back into position until
flush with the case and screw in.
Second hand
Chronograph:
The
minute counter
measures 30 minutes per rotation.
The
centre stop-second
measures 60 seconds per rotation.
The
1⁄10 second counter
measures 1 second per rotation. After 30 minutes this counter
works as an
hour counter
. The hour counter measures 10 hours per rotation.
Display elements
Centre stop-second
Minute counter
1⁄10 second counter
(hour counter after 30 minutes)
Control buttons
Push-button A
(Start / Stop)
Push-button B
(Reset)
Please note:
Before using the chronograph functions, please ensure that:
The crown is in position (screwed in).
The 3 chronograph hands are at zero position following activation of push-button B.
Should this not be the case, the positions of the hands must be adjusted (see the chapter
entitled ‘Adjusting the chronograph hands to zero position’).
1
1
1
2
3
1
2
3
3
1
