Setting the time and date
8
To get to position , turn the crown anti-clock-
wise until it releases itself.
From position , pull the crown to position
and adjust the calendar display in a clockwise
direction and the day in an anti-clockwise
direction
Pull the crown to position and adjust the
time setting in either a clockwise or anti-
clockwise direction.
After adjusting to the correct time ensure that
the crown is screwed back in until flush with the
case in order that water resistance is maintained.
Fitting the bracelet
If you find the bracelet needs adjusting to your wrist we recommend you have it re-sized by a
reputable watch repairer or jeweller. Most local jewellers will either do this for free or perhaps make
a nominal charge for what is a job that should only take a few minutes. It is always best to be
present so a comfortable fit is achieved.
Establishing the length of the bracelet
Place the watch with its separated bracelet on your wrist and estimate the number of links you need
to remove. If you need to remove several links, try to keep the numbers removed from both halves
of the bracelet as equal as possible to ensure that the clasp remains roughly in the middle of your wrist.
9
1
3
1
2
1
To open your bracelet simply press either side of
the clasp to release as shown.
Press
3
2
