Christie Vive Audio S118LP Low Profile Subwoofer User Manual
7
020-101267-03 Rev. 1 (03-2018)
Installation
Complete the following procedures to install the speaker.
Connect the speaker wire
1. Install the speaker according to the mounting instructions provided in this manual.
2. Connect the speaker wire to the positive (A) and negative (B) terminals on the back of the
speaker.
Use a #8 spade lug (part number: 145-159106-XX) if you are creating crimped spade lug
terminations.
Warning!
Failure to comply with the following could result in death or serious injury.
• Before installation, inspect all components for cracks, deformations, corrosion, and
missing or damaged parts that could reduce their installation strength.
• A minimum of two people are required to safely lift and install the speaker.
• Speakers must be affixed to a suitable structure following all local safety standards and
regulations.
• Only use attachments or accessories specified by the manufacturer.
Notice.
Failure to comply with the following may result in property damage.
• Allow speakers exposed to extremely low temperatures to warm for a minimum of one
hour before playing them at typical application levels. Failure to comply may result in
equipment or property damage.
• Speaker wire affects sound quality. Make sure the speaker wire quality and gauge are
appropriate for your application.
• The high-pass filter must be set to 24 dB/octave Butterworth at 20 Hz to avoid damaging
the subwoofer.
Notice.
Failure to comply with the following may result in property damage.
• The amplifier must be turned off and unplugged before you start this procedure.
