Christie Vive Audio CDA2, User Manual, Page: 15 / 28

Christie Vive Audio CDA2/CDA3 Amplifiers User Manual 7
020-100355-02 Rev. 1 (03-2014)
Installation
This section provides information and procedures for installing and connecting the Christie Vive Audio
CDA2/CDA3 Professional Power Amplifiers.
Install the CDA2 or CDA3
An incorrect power setup creates a fire and shock hazard. Do not attempt operation
unless the power cord, power socket, and power plug meet the appropriate local
rating standards. Have a certified electrician install a permanent single-phase
connection from the amplifier to the AC supply for correct installation. Failure to
comply could result in death or serious injury.
Always provide proper ventilation to the Christie Vive Audio CDA2/CDA3 Professional
Power Amplifiers. Allow 31 cm (12 in.) clearance at the front and the back of the
amplifier. Make sure that vents are not blocked and that air can flow freely through
the unit. Do not use doors or covers on the front of the rack. If a back cover is used,
provide at least one standard rack-space opening for every 4 amplifiers. Failure to
comply may result in equipment or property damage.
1. Slide the CDA2 or CDA3 amplifier into your rack.
2. Secure the amplifier in position using 4 screws through the rack mounting ears.
3. Connect one end of the power cord to the AC power inlet and the other end to the power outlet.
4. Connect the output and input connectors.
See
Output Connections on page 9, and Input Connections on page 8.
5. Turn the power on.
See
Turn the Power On on page 10.
Input Connections
Always turn off and disconnect the Christie Vive Audio CDA2/CDA3 Professional
Power Amplifiers from power before making audio connections. Failure to comply
may result in equipment or property damage.
This section describes the input connections of the Christie Vive Audio CDA2/CDA3 Professional Power
Amplifiers.