Install TVC-700
10
TVC-700 User Manual
020-100906-01 Rev. 1 (03/13)
Warnings and Precautions
Rack Precautions
Processor Precautions
• Ensure that the leveling jacks on the bottom of the rack
are fully extended to the floor with the full weight of the
rack resting on them.
• In single rack installation, stabilizers should be attached to
the rack. In multiple rack installations, the racks should be
coupled together.
• Always make sure the rack is stable before extending a
component from the rack.
• You should extend only one component at a time.
Extending two or more simultaneously may cause the rack
to become unstable.
Failure to comply may result in equipment damage.
• Determine the placement of each component in the rack
before you install the rails.
• Install the heaviest components on the bottom of the rack
first, and then work up.
• The TVC-700 weighs approximately 72 lbs. (32.7 kg) when
fully loaded. When lifting the system, 2 people at either
end should lift slowly with their feet spread out to
distribute the weight. Always keep your back straight and
lift with your legs.
• Use a regulating uninterruptible power supply (UPS) to
protect the processor from power surges and voltage
spikes and to keep your system operating in case of a
power failure.
• Allow any hot plug drives and power supply modules to
cool before touching them.
• Always keep the rack’s front door and all panels and
components on the processors closed when not servicing
to maintain proper cooling.
Failure to comply may result in equipment damage.
Summary of Contents for TVC-700
