Serial Command Reference
Mirage WQ-L User Manual
101
020-101372-01 Rev. 1 (04-2014)
3D Emitter Delay (TDD)
Adjust the output 3D emitter delay to match the active glasses to the L/R frames of the projector.
Proper adjustment of this delay will eliminate cross talk and odd colors caused by timing differences
between the glasses and the projected image. The user specified delay is added after sync locking.
Parameters
• Control Group: Preference
• Subclass: Power Up
• Access Level: Operator
4
User 4
C
Alias to selected table
Subcode
SLCT
Description of Use
Selects the color space preset:
0 = Max drives (M) 5 = User 1 (1)
1 = EBU (E) 6 = User 2 (2)
2 = SD Video (S) 7 = User 3 (3)
3 = HD Video (H) 8 = User 4 (4)
4 = Factory (F)
RDxX
Adjusts the x coordinate of the red color point (0 - 800 with three decimal
places)
RDxY
Adjusts the y coordinate of the red color point (0 - 800 with three decimal
places)
GNxX
Adjusts the x coordinate of the green color point (0 - 800 with three decimal
places)
GNxY
Adjusts the y coordinate of the green color point (0 - 800 with three decimal
places)
BLxX
Adjusts the x coordinate of the blue color point (0 - 800 with three decimal
places)
BLxY
Adjusts the y coordinate of the blue color point (0 - 800 with three decimal
places)
COPY
Copy gamut settings from preset to current. Value 0-8 for source preset
CCAP
Read-only field which returns string that gives relationship between projector
capability and the color target.
Examples:
(TCS+SLCT 1) Select EBU color gamut as target.
(TCS+RDCX 290) Set current Target gamut red x point to 0.290.
(TCS+BLEY ?) Return value of EBU preset blue y point.
(TCS+COPY 3) Copy settings from HD Video to current.
TCS
