Installing the Mirage
SST Rigging Frame
Adapter Plate
This document provides details for installing the rigging frame adapter plate.
Affected products
The following products are affected:
•
Mirage SST
Required components
The following components are required.
•
Mirage SST Rigging Frame Adapter (P/N: 168-105107-XX)
•
Frame Rigging Percision 1 (P/N: 165-101103-XX)
Tools required
The following tools are required for installing the rigging frame.
•
8 mm hex key
•
10 mm hex key
Safety warnings and guidelines
Read all safety and warning guidelines before starting this procedure.
Danger! If not avoided, the following results in death or serious injury.
•
Do not stack the device unless specified in this manual.
•
The supporting structure must safely support the combined load of the product, all attached
hardware, and components following all local safety standards and regulations.
•
Use all mounting points, including the safety point, when installing the product overhead.
Installing the Mirage SST Rigging Frame Adapter Plate Instruction Sheet
1
020-103164-02 Rev. 1 (08-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
