Brightness
•
10000 ANSI /- 10%
•
Over 90% brightness uniformity
Contrast Ratio
•
300:1 ANSI, 500:1 full field
Resolution
•
1024 x 768 true resolution with resizing
capabilities to scale down from 1280 x
1024 and scale up from 640 x 480
•
16.7 million displayable colors
•
3-DMD™ Optical System (SLIC™)
•
13-bit user selectable gamma table
Horizontal Frequency
•
15kHz to 120kHz
Vertical Frequency
•
24Hz to 120Hz
Dot Clock
•
160 MHz
Field Interchangeable Optional Lenses
•
Fixed short throw lens: 0.8:1
•
Zoom lenses: 1.5-2.5:1, 2.5-4:1, 4-7:1
•
Vertical lens offset: Up to 100% for
off-axis projection
•
Horizontal lens offset: Up to 75%
•
Intelligent Lens Systems (ILS™);
automatic adjustment of zoom (with
zoom collar), focus, vertical and
horizontal lens offset
•
Lens mount tilt adjustment
•
Built-in light shutter
•
Screen size 72" to 480"(1.8 m – 12.2m)
diagonal image size (lens dependent)
•
Motorized lens mount
Dynamic Scaling
•
Resizing processing for computers
and workstations up to 1600 x 1200
resolution
•
Independent horizontal and vertical
image size adjustment for graphics
and video
Inputs
•
Input 1: Analog RGB 5 BNC for
RGBHV, YPrPb, YCbCr and YUV
•
Input 2: Optional plug-in input
modules
•
Separate, composite sync and sync-
on-green compatible
•
HDTV Tri level sync compatible for all
known HDTV formats
Stereoscopic Source Compatibility
•
Active stereo XGA with vertical refresh
rates up to 120Hz, with one field
delay, without frame dropping
•
In 3D mode, inputs must be in RGB
Enhanced Feature Set
•
Variable lamp power
(1.4 - 1.9kW on lamp)
•
Intuitive on-screen display (OSD)
•
Service functions can be
password protected
•
Multiple language support
•
100 channel memories
•
Dark Interval Adjustment (DIA™)
•
Auto set-up feature
Control/Networking
•
Auto power-up
•
Dual RS232 and dual RS422
communication port
•
IR Remote keypad
•
Front and rear IR receiver
•
Optional 2-way controller RS422
•
Built-in backlit keypad
Lamp Specifications
•
1900W Xenon
®
lamp
•
Color temperature range 3200K
to 9300K
•
Over 1000 hours of lamp life
•
User replaceable lamp
Power Requirements
•
Voltage range: AC 220 - 240V +/- 10%
•
Line frequency: 50 - 60 Hz nominal
•
Power consumption: 2800W maximum
•
In-rush current rating: 60A maximum
•
Current rating: 14 Amps maximum
at 200VAC
Environmental
•
Operating temperature: 0 - 35° C
•
Operating humidity: 20 - 80% non-
condensing
Diagnostics
•
Built-in diagnostics LCD display indicates
operational status and error messages
•
Power and status LEDs
•
Full diagnostics through RS232
9-pin D connector
Size and Weight
•
220 lbs. (100 kg)
•
29" W x 54" L x 16" H
•
73.7cm W x 137.2cm L x 40.6cm H
Standard Accessories
•
IR (infrared) remote keypad -
includes batteries
•
User manual
•
Warranty Registration Card
•
4 eyebolts for hoisting: 1/2"-13 x 1 1/2"
Optional Accessories
•
Wired two-way remote controller
(RS422) with LCD display
•
Remote IR sensor
•
Replacement lamp kit
•
Multi-standard video decoder
(NTSC 3.58, NTSC 4.43, PAL,PAL 60,
PAL M, PAL N, SECAM)
•
DVI/DFP module
•
Digital HDTV module (SMPTE 292)
•
Service manual
•
Vista compatible analog input modules
•
Compatible with selected third
party switchers
•
Librarian communication software
•
Serial Digital Input (SMPTE 259M/
CCIR 601)
•
10-bit ADP (Advanced Digital Processing)
used in non-stereo mode
•
Arbitrary Gamma Table Software
•
Wired remote backlit keypad
•
Optional sound reduction kits
Regulatory Approvals
•
Safety: CSA C22.2 No. 950, UL 1950,
EN609050 European Norm "Safety of
Information Technology Equipment"
•
47CFR 2 and 15 (FCC) Class A - US -
Conducted and Radiated Emissions
Standards
•
CRC 1374 (DOC) Class A - Canadian -
Conducted and Radiated Emissions
Standards
•
Emissions per EN50081-1; Immunity
per EN50082-1
•
ESD Susceptibility: EN61000-4-3 Level 3
•
Radiated Susceptibility: EN61000-4-3
Level 3
•
EFT/Burst: EN61000-4-4 Level 4
•
Input transient protection: EN61000-4-5
Level 3
Warranty
•
1 year parts and labor
•
Accessories: One year
Mirage 10000
•
Specifications
•
Christie-designed electronics provide the
most advanced digital signal processing
for all types of stereo images.
•
The Mirage 10000 is fully digital and
requires only one projector to
produce stereoscopic images.
•
Intelligent Lens System (ILS™)
recalls focus, zoom and positioning
settings of each input source.
F E AT U R E S
Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks, registered
trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified. MIL4999
Due to constant research,
specifications are subject to
change without notice
.
July 02-NA
WWW.CHRISTIEDIGITAL.COM
Head Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: +714-236-8610
FX: +714-503-3385
Toll free: (800) 407-7727 (NA only)
[email protected]
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: +519-744-8005
FX: +519-749-3136
Toll free: (800) 265-2171 (NA only)
[email protected]
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
[email protected]
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
[email protected]
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
[email protected]
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
[email protected]
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
[email protected]
