Power requirements
Learn the power requirements for Christie M RGB Series.
Parameter
Requirement
Rated voltage
100-120 VAC single phase
200-240 VAC single phase
Rated current
12 A at 100-120 VAC
9 A at 200 to 240 VAC
Line frequency
50/60 Hz
Maximum power draw
1800 W
AC limited voltage
100-120 VAC achieves 60% brightness
Projector components
Identify the main components of the projector.
ID
Component
Description
A
Projection lens
A variety of lenses can be used with the projector. Available lenses are listed in the
Accessories (on page 16) topic.
B
Front IR
Receives transmissions from the IR remote.
C
Display panel
Displays the projector menus and status.
D
Keypad interface
Controls the projector.
E
Communication and
input panel
Connects media sources to the Video Input panel.
F
Power on/off switch
Switch to power the projector on or off.
G
AC input
For use with projector power cord.
H
Rear IR
Receives transmissions from the IR remote.
I
LED and shutter LED
status indicator
Indicates power status and shutter status.
Installation and setup
Christie M RGB Series Installation and Setup Guide
20
020-103483-04 Rev. 1 (04-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
