Christie IMB, User Manual

Page: 107 / 122

Troubleshooting
Christie Integrated Media Block User Manual 95
020-100845-05 Rev. 1 (08-2013)
Set Up and Connection Troubleshooting
Why does my content appear vertically or
horizontally compressed? When you play 3D content on a 2D channel, the projector displays
the left and right images as a single, tall image. The images are
played as line interleaved and this results in an interleaved image
that is twice as tall as an ordinary image. The integrated cinema
processor (ICP) scales the image to fit on the digital micromirror
device (DMD) and the result is an image with blank space at the
sides of the screen:
When you play 2D content on a 3D channel, the projector attempts
to extract left and right images from a single, 2D frame. The images
are played as line interleaved with half the lines allocated to the left
eye and half the lines allocated to the right eye. The projector
displays only a single eye with half the number of lines and the result
is an image with blank space at the top and bottom of the screen:
If you want to play 2D and 3D content in the same play list, play the
content with a 3D channel. The Christie IMB frame doubles the 2D
image to generate left and right eye frames
Problem Resolution
How do I remotely connect to the projector? Open an internet browser and then enter the IP address for the
projector in the address field. Add :5800 to the end of the IP
address. For example, 192.168.1.2:5800.
If you are using Internet Explorer version 8 or older, add a forward
slash after the port number. For example, 192.168.1.2:5800/.
How do I connect to the web interface for
the Christie IMB? Open an internet browser and then enter the IP address for the
projector in the address field. For example, 192.168.1.2.
To use the web interface, you must have Microsoft Silverlight
installed and the computer must be on the same network as the
projector in which the Christie IMB is installed.
How do I control the projector with Virtual
Network Computing (VNC)? Download and install a VNC client such as TinyVNC. Set the remote
host of the VNC viewer to the IP address of the projector.
When setting up my Christie IMB, what are
the IP address and subnet considerations? See IP and Subnet Considerations on page 3.
Problem Resolution