Christie FHD651-P, User Manual

Page: 20 / 64

12 FHD651-P and FHD651-T LCD Panels User Manual
020-000693-01 Rev. 1 (02-2014)
Installation
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• For best performance and to minimize cable clutter, use high-quality cables that are only as long
as necessary to connect two devices. (Don’t use a 20-foot cable when a 6-foot cable will suffice.)
• Ensure that the cables are securely connected. Tighten the thumbscrews on connectors that have
them.
Connecting a Control System or PC
RS232 Connection
Use a straight-through RS232 cable with a 9-pin male connector to connect a PC or control/
automation system (if present) to the RS232 port on the display. For more information about using
this connection, refer to
External Control on page 39.
to Automation/
Control System
or PC
2 Receive Data
(to ctrl. system)
3 Transmit Data
(from ctrl. system)
5 Ground
1 2 3 4 5
7
8 9 6