manualshive.com logo in svg

Christie Extreme Series, Technical Reference

Share
Download
Christie Extreme Series Technical Reference Download Page 13

Using the Video Wall

Toolbox application

The Video Wall Toolbox application can be used to configure and control a single display panel or a

video wall.
The application provides an alternative to using the remote control unit or built-in keypad. It presents
all of the controls in the on-screen display (OSD) menus as a graphical user interface.
To use the Video Wall Toolbox application, the control computer must be running Windows 7 or later.

Installing the Video Wall Toolbox application

Learn how to install and set up the Video Wall Toolbox application on the control computer.

1. Download the Video Wall Toolbox application from https://www.christiedigital.com/.
2. Connect the control computer to a display panel or video wall.

For detailed instructions on connecting a control computer to a video wall using an RS232 or
an Ethernet connection, refer to the user manual for the product.

3. Verify that the baud rate for the RS232 connection on the control computer matches the baud

rate of the display panel.
The default baud rate is 115200.

4. Launch The Video Wall Toolbox application.

 

Extreme Series LCD Panels Technical Reference–External Controls

13

020-102499-04 Rev. 1 (11-2017)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for Extreme Series


























Reviews:

No comments

Brands by name

Popular brands

Load more brands