Christie DWU951, User Manual

Page: 15 / 44

13
DWU951/DWX951/DXG1051 User's Manual - Technical 020-000664-01 Rev. 1 (01-2014)
USB wireless adapter
LAN or
HDBaseT port
LAN or HDBaseT port
・
LAN cable (CAT-5e or greater)
or
・
For HDBaseT connection
- CAT-5e or greater
- shielded type (connectors included)
- straight cable
- single cable
WIRELESS port
When the projector connects to the network, the projector can be controlled with
RS-232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table (
&
19
).
Command Control via the Network
Connection
1.
Turn off the projector and the computer.
2.
If you use wired LAN, connect the projector's
LAN or HDBaseT
TM
port to the
computer's LAN or HDBaseT port with a LAN cable. Use the cable that fulfi lls
the specifi cation shown in fi gure. If you use wireless LAN, insert the USB
wireless adapter into the
WIRELESS
port of the projector.
3.
Turn the computer on, and turn the projector on after the computer has
started up.
NOTE
• If data is transferred via wireless and wired LAN at the same time,
the projector may not be able to process the data correctly.
Command Control via the Network