49
Configuring system settings
7. To exit the menu, press
EXIT
.
8. To refine your adjusts, repeat steps 2 to 7.
Adjusting lens position
Shift the lens to the specific position.
1. Display an image or test pattern that can be used to analyze image location.
2. Press
LENS
on keypad or
LENS H/LENS V
on remote control.
You can also select
Menu
>
Configuration
>
Lens Settings
>
Lens Shift
.
3. Use the arrow keys to adjust the lens position.
4. To exit the menu, press
EXIT
.
Saving lens setting
Save the lens position. One projector can save maximum up to five lens settings.
1. Select
Menu
>
Configuration
>
Lens Settings
>
Lens Shift Memory
>
Save Current
Settings
.
2. To save the lens setting, select an empty record.
3. To confirm the selection, press
ENTER
.
Applying the previous lens setting
Apply the previously saved lens setting to the projector.
1. Before applying the previous lens setting, you need to save the lens setting.
See
on page 49 for further details.
2. Select
Menu
>
Configuration
>
Lens Settings
>
Lens Shift Memory
>
Apply Position
.
3. To apply specific lens setting, select the required record.
4. To confirm the selection, press
ENTER
.
Locking the lens motor
Prevent all lens motors from moving. It disables the zoom, focus, and offset settings, locking out
any changes and overriding all other lens features. This feature prevents accidental lens position
changes in multiple projectors installations.
1. Select
Menu
>
Configuration
>
Lens Settings
>
Lock all Lens Motors
.
2. To enable locking of all lens motors, select
Locked
.
3. To unlock all lens motors, select
Allow
.
4. To confirm the selection, press
ENTER
.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (
02
-202
2
)
Copyright © 202
2
Christie Digital Systems USA Inc. All rights reserved.
