29
Adjusting the size and position
Applying geometry correction
Apply the previously saved geometry setting to the projector.
1. Before applying the previous geometry setting, save the geometry setting to the projector.
See
on page 28 for further information.
2. Select
Menu
>
Size & Position
>
Geometry Correction
>
Warp Memory
>
Apply Warp
or
Blend Memory
>
Apply Blend
.
3. To apply the specific geometry setting, select the required record.
4. To confirm the selection, press
ENTER
.
5. To erase the applied geometry setting, select
Off
.
Enabling basic image blending
Configure blends directly on the projector to increase or decrease the borders of an individual
image, so it blends with a neighboring image to create a single, seamless image.
You can set blends on a projector when not using Christie Twist and Mystique. Connecting to Twist
and Mystique grays out the blend settings on the projector. Applying blends from Twist and
Mystique overwrites the blends directly set on the projectors.
1. Select
Menu
>
Size & Position
>
Geometry Correction
>
Blend Area
.
2. Choose a side to blend in with the other projectors.
3. To set up the starting position, select
Start Pixel
.
4. Adjust the slider by arrow keys or press
ENTER
to input the starting position.
5. After inputting the starting position, press
ENTER
.
6. To set up the size of blend area, select
Pixel Height
.
7. Adjust the slider by arrow keys or press
ENTER
to input the width of blend area.
8. After inputting the size of blend area, press
ENTER
.
9. To set the gamma value of the blend area, select
Blend Gamma
.
10. After selecting a gamma value, press
ENTER
.
11. To apply the settings, select
Enable
.
12. Press
ENTER
.
13. To save the blend setting, select
Menu
>
Size & Position
>
Geometry Correction
>
Blend
Memory
>
Save Blend
.
14. To set up the other side of blend area, repeat step 2 to 13.
GS Series 2K User Manual - DWU880-GS, DWU880A-GS, DWU9200-GS, DWU1100-GS, DWU1100A-GS
020-001908-01 Rev. 1 (
02
-202
2
)
Copyright © 202
2
Christie Digital Systems USA Inc. All rights reserved.
