Christie DHD675-E, Service Manual

Page: 30 / 122

3-14 E Series 675/775 Service Manual
020-000546-04 Rev. 1 (04-2017)
Section 3: Service Setup
3.13 Wireless Function Test
3.13.1 Setup Network Setting
See Section 3.12.2 Network Setting.
3.13.2 Install Christie Presenter
1. Using Internet Explorer 8 or higher, navigate to your projector IP address. (default: 192.168.0.100).
2. Select Administrator for access type.
3. Key in the password admin .
4. Click Login .
5. Click Download .
6. Click Save .
7. Double click Christie Presenter and complete the installation wizard.
3.13.3 Wireless Testing
Before using this function, a USB dongle is needed to connect the projector and PC host directly. When the
connection is made, the PC will show a USB device disk.
1. Select Christie Presenter .
2. Select Search .
3. Click OK .
4. Key in the password you want to set.
5. Click OK
6. The projector screen will display the content which is the same as the PC.
3.14 Boresight Alignment
1. Press TEST on the remote keypad to display the
boresight test pattern. Alternatively, click Test >
Boresight > Enter from the LCD display.
2. Focus the image on cross-hair pattern I. Evaluate the
focus on cross-hair image II and III. If all three
images are in focus, no further action is required.
• Boresight alignment is an advanced feature and should only be performed by a Christie
accredited service technician.