background image

                                 Regulatory

HS Series D16-20 Installation and Setup Guide

40

020-001464-02 Rev. 1 (10-2018)
Copyright ©2018 Christie Digital Systems USA Inc. All rights reserved.

Regulatory

This product conforms to the following regulations related to product safety, environmental 
requirements and electromagnetic compatibility (EMC).

Safety

• CAN/CSA C22.2  No. 60950-1-07 – Information Technology Equipment – Safety – Part 1: 

General Requirements

• ANSI/UL 60950-1-2014 – Information Technology Equipment – Safety – Part 1: General 

Requirements 

• IEC/EN 60950-1 – Information Technology Equipment – Safety – Part 1: General Requirements 

Laser safety

• IEC 60825-1 – Safety of Laser Products – Part 1: Equipment Classification and Requirements

• IEC 62471-1 – Photobiological safety of lamps and lamp systems 

• IEC/EN 62471-5 - Photobiological safety of lamps and lamp systems – Part 5: Image projectors

• FDA CDRH 21CFR 1040 - Performance Standards For Light-Emitting Products

Electro-magnetic compatibility

Emissions

• FCC CFR47, Part 15, Subpart B, Class A - Unintentional Radiators 

• CAN ICES-3 (A/B) / NMB-3 (A) - Information Technology Equipment (Including Digital 

Apparatus)

• CISPR 32:2014/EN 55032:2014, Class A - Information Technology Equipment 

• IEC 61000-3-2/EN61000-3-2 - Limits for Harmonic Current Emissions

• IEC 61000-3-3/EN61000-3-3 - Limitations of Voltage Changes, Voltage Fluctuations, and Flicker

Summary of Contents for D16HD-HS D20WU-HS












































Reviews: