Important Safety Information
HS Series 2K Product Safety Guide—D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
3
020-001465-03 Rev. 1 (09-2019)
Copyright © 2019 Christie Digital Systems USA Inc. All rights reserved.
Mandatory action
Electrical labels
Laser labels
This projector has been classified as Class 1 Laser
Product-Risk Group 3 according to the IEC 60825-
1:2014 and IEC 62471-5:2015 standard.
Additional safety hazard
Important safeguards
To prevent personal injury and to protect the device
from damage, read and follow these safety precautions.
This projector is intended for use in a non-cinema
environment.
Safety and warning guidelines
Read all safety and warning guidelines before installing
or operating the projector.
• Do not expose the product to moisture.
• Do not operate the product without all of its covers
in place.
• This product must be installed within a restricted
access location not accessible by the general public.
• Only personnel who are trained on the precautions
for the restricted access location can be granted
entry to the area.
• FIRE HAZARD! Keep hands, clothes, and all
combustible material away from the concentrated
light beam of the projector.
• TRIP OR FIRE HAZARD! Position all cables where
they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or
objects rolling over the cables.
• SHOCK HAZARD! Disconnect the product from AC
before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are
authorized to service the product.
General hazard.
Electric shock hazard. To avoid personal
injury, disconnect all power sources before
performing maintenance or service.
Electrocution hazard. To avoid personal
injury, always disconnect all power sources
before performing maintenance or service.
Hot surface hazard. To avoid personal injury,
allow the product to cool for the
recommended cool down time before
performing maintenance or service.
Burn hazard. To avoid personal injury, allow
the product to cool for the recommended
cool down time before performing
maintenance or service.
Moving parts hazard. To avoid personal
injury, keep hands clear and loose clothing
tied back.
Fan hazard. To avoid personal injury, keep
hands clear and loose clothing tied back.
Always disconnect all power sources before
performing maintenance or service
procedures.
Voltage hazard. To avoid personal injury,
always disconnect all power sources before
performing maintenance or service
procedures.
Bright light hazard. To avoid personal injury,
never look directly at the light source.
Not for household use.
Consult the service manual.
Disconnect all power sources before
performing maintenance or service
procedures.
Indicates the presence of an earth ground.
FDA laser variance
(US projectors only)
Indicates a light hazard.
Do not look directly into
the lens. The extreme
high brightness can
cause permanent eye
damage. Class 1 Laser
Product-Risk Group 3
according to Class 1 IEC
60825-1:2014 and IEC
62471-5:2015.
Do not look directly into the lens.
The extremely high brightness can
cause permanent eye damage.
Warning! If not avoided, the following
could result in death or serious injury.
Christie Digital Systems Canada Inc.
809 Wellington Street North
Kitchener, ON N2G 4Y7
Canada
This product complies with performance standards for laser
products under 21 CFR Part 1040 except with respect to those
characteristics authorized by Variance Number 2016-V-1838
effective June 20, 2017.
U.S.A Only
Summary of Contents for D13HD2-HS
Page 57: ......
