Ventilation and cooling
HS Series D13 Service Manual
72
020-000892-03 Rev. 1 (12-2019)
5. Remove the fan harnesses from the clips.
6. To separate the fan from the shielding, remove the six M3 screws with a Phillips #1 screwdriver.
7. Remove the corresponding fan from the rubber.
8. Replace the affected fan.
9. To re-install, follow these steps in reverse order.
Replacing fans 4, 5, 6, and 7
The fans 4, 5, 6, and 7 draw the air into the projector and provides exhaust cooling for the pump and
radiator module.
1. Remove the top cover.
2. Remove the main board and main board bottom shielding.
Replacing the main board and media board
3. Remove the nine screws securing the thermal cooling fan module.
Summary of Contents for D13HD-HS
Page 1: ...HS Series D13WU HS D13HD HS Service Manual 020 000892 03...
Page 112: ......
