Operation
Learn how to turn the projector on and off. You can operate the projector from the remote UI or from
an optional touch panel.
Turning the projector on
Learn how to turn the projector on.
1. Turn on the circuit breaker for the projector.
2. Press and hold the Green Power icon.
3. To ignite the lamp, press and hold the Light Bulb icon.
Turning the projector off
Learn how to turn the projector off.
1. Press and hold the Light Bulb icon to turn the lamp off.
2. Press and hold the Red power icon.
The projector enters a cool-down mode and the fans and electronics stay on for 10 minutes.
After this cool-down period, the projector enters Standby mode.
Projector power states
Learn what occurs when you press the Power and Lamp icons.
Button pressed
Projector's current state
—
Enters Standby
power mode
(Solid yellow)
Power is on and the
lamp is off
(Flashing green)
Power is on and the
lamp is off
(Solid green)
Cool-down mode
(Yellow/green
flashing)
Power On
Powers on to full
power (boot delay)
No action
No action
Cancels cool down
and goes to full
power
Power Off
No action
Powers off
immediately
Turns the lamp off
immediately; enter
cool-down mode
No action
Lamp On
Power is on and
turns on the lamp
(boot delay)
Immediately turns on
the lamp
No action
Cancels cool down
and immediately
turns on the lamp
Lamp Off
No action
No action
Immediately turns
off the lamp
No action
CP2420-Xe and CP4420-Xe Installation and Setup Guide
35
020-103555-01 Rev. 1 (03-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
